Enabling the monitoring view

Turn on the spectrum monitoring view for every group in the zone at once — live amplitude bars next to each frequency in the coordination list.

The monitoring view shows each coordinated frequency’s current measured amplitude — from the zone’s scan data or a live scan — right in the coordination list, so you can watch your frequencies’ spectrum health while you work.

Enable it for the whole zone

1. Open the zone selector menu.
2. Click Enable Monitoring View (or Disable Monitoring View to turn it off).

This toggles the monitoring view on every group in the zone. To monitor only some groups, use the per-group toggle instead — see Enabling groups for monitoring.

Requirements

The monitoring view requires a SoundBase Pro subscription — without it, the menu item shows a Pro badge and is disabled. It’s also a personal view setting: enabling it changes what you see, not your collaborators’ screens.

Two different “monitoring” features

This page is about the spectrum monitoring view — watching frequencies against scan data. Monitoring your actual hardware (RF/audio meters, battery, telemetry from receivers) is the Monitoring page: see the Monitoring guide. The zone’s Monitor tab, which manages the devices behind that page, is covered in Discovering devices.