Enabling/disabling groups for monitoring view

Choose which groups show live spectrum monitoring in your coordination list — a personal, per-group toggle.

With the monitoring view enabled for a group, its frequencies display their current measured amplitude from the zone’s scan or live-scan data, right in the coordination list.

To toggle it for one group:

1. Click the group’s Group Actions (⋮) button.
2. Click Enable Monitoring View (or Disable Monitoring View).

Note

• Requires a SoundBase Pro subscription — the item carries a Pro badge otherwise.
• This is a personal view setting: it changes what you see, not your collaborators’ screens.
• To toggle every group in the zone at once, use the zone-level switch — see Enabling the monitoring view.

Related: putting a group’s frequencies on real hardware

Monitoring a group on screen is one thing; assigning its frequencies to receivers is another. You can drag a group’s header onto a device (or a channel card) in the zone’s monitoring setup to assign the group’s frequencies to that device’s channels in order. Coord validates the names first and confirms with Frequencies assigned successfully. See Discovering devices and the Monitoring guide for the device side.